And this one hasn’t, so I can’t complain about that.
Once you do that, you're good to go.Ĭons: Again, there isn’t much to say about a hard drive unless it stops working.
#Best external ssd for imac mid 2011 windows
Set up is the same as any other new drive you must initialize it and format it in Windows, or do it during windows installation. It also has 64 mb of cache for better access times. This drive features SATA 6 to take advantage of its capabilities. Newegg doesn’t officially list any speeds for this drive, but in my experience, this is right around where my existing physical hard disk drives max out. I am seeing up to 120 MB/s read and 100 MB/s write across both drives (see “other” section). My current set up uses a 120 GB SSD (550 MB/s read/500 MB/s write) along with this drive and another older 1 TB WD (Caviar) Black drive in a RAID 1 set up. I can’t comment on the reliability of this drive as I’ve only put about 100 hours on it, but if it is anything like the other WD drives I’ve used, it should be good for many years. I have only had one failure, and that was a drive that had been in constant use for more than 6 years. I’m glad to report that this drive not only works, but it’s pretty quick, too.Īfter struggling with several other brands of hard drive makers, I switched to Western Digital a few years back. Otherwise, as long as it works, it makes most everyone happy.
#Best external ssd for imac mid 2011 install
Occasionally, you get a drive that arrives DOA or dies shortly after you install it. Pros: For a hard drive, there isn’t much that can be really good or bad. *All tests were conducted three times to ensure accuracy and repeatability of results. Not related to the drive but Newegg’s new hard drive packaging is fantastic as the drive is held together so tightly I could barely get it out of the box. In the end this is no SSD in terms of speed but for file storage look no further.
The drive ran very cool as it only has one platter inside and was in a case with fans blowing cool air directly on it. Specifically looking at power consumption this actually used less power than an old 5900 RPM 750 GB WD green drive from 2009 that I have while of course obliterating it in the performance sector. By switching to 1 TB platters, the performance has greatly increased and their power consumption reduced over their multi platter predecessor. Overall Review: Overall I am very impressed with Western Digital’s new and improved drives. Again not really a con as it wasn’t really that bad just more than the old model. Granted it was not secured into a case like it should but the Vibration Control Technology featured in this family of drives probably would have reduced that as it is only present in the 2 TB and up drives, so my drive being the 1 TB variant, it doesn’t have it. So if you don’t have a SATA III capable motherboard, don’t worry about it.Ĭons: The only con that I can think of is very minor but while sitting on a motherboard box, the vibration produced by the hard drive was more than I expected and was more than the previous model also tested on the same box.
I also tested the new drive on a SATA II connection and as I figured the results were within a margin of error as some values were higher and some were lower than when on the SATA III connection. I tested the previous model of this drive being the WD1003FAEX from 2010 vs. (Older model was WAY louder, heard it constantly) The only time I ever heard it was when it went into its standby phase and I could hear it spin down as it was shutting off. Very quiet, never made a sound while in use.
0 kommentar(er)
